Panther LS Builder Steve Pedano’s Engine Run 2 comments


Panther LS builder, Stephen Pedano, is closing in on completing his build and getting his FAA inspection.  His Panther LS is powered by a Lycoming O-320 conical mount configuration, and a WhirlWind ground adjustable propeller.  He is using a Vetterman Panther Lycoming exhaust, GRT 8.5 Sport, Matco 5×5 tires and an SPA 6″ tail wheel.  His weight, with no fuel, is 821 lbs.  Here are a few photos and a video of his engine run!

DSC_0227 DSC_0229

Steve will continue to test the engine and continue to go over the air frame while he waits on his DAR inspection.

 

 


Share your thoughts

2 thoughts on “Panther LS Builder Steve Pedano’s Engine Run