Rss Twitter Facebook

Value, Versatility and Integrity

Vertical Stabilizer, Tail Tips and Turtledeck Progress

Picture gallery showing the vertical tail mount, tail tips and turtledeck aft skins.

Vertical Tail Tip prepped for a fiberglass mold

 

Vertical Tail Mounted

 

Rear view of the Panther

 

Veiw of the tail from the left side of the Panther

 

Horizontal tail tip – covered in epoxy, still needs some finishing work before it will be ready for mold

 

Veiw of the tail from the left side of the Panther

 

Tail tips – this will be used for both sides of the tail

 

Tail tips front view – this will be used for both sides of the tail

 

Underside View

 

Front View

 

Top View

 

Rear View

 

Rear side view

 

Front view

 

View from from left side of Panther

 

View of the right rear

 

Full Left Side View of the Panther

 

Full Left Side View of the Panther

 

Vertical Tail mounting bracket – still needs a few bolts – ACS delivering today

Rudder control arm view from right side

 

Closer view of the vertical tail mounting bracket

 

Left view of rudder control arm

 

Rudder control arm view from right side – zoomed in

Leave a Reply

Your email address will not be published. Required fields are marked *

Great airplane and great people to work with. Buddy Henson Green Cove Springs, FL Panther Tri-Gear March 3, 2021.                                                                                
Buddy HensonGreen Cove Springs, FL Panther Tri-Gear March 3, 2021
My Panther build was really a lot of fun. I completed the entire project in my two car garage then moved it to the airport for the first flight. I always get comments over the radio about what a great looking plane it is. It's a real blast to fly.
Tom Kodey Port Orange FL Panther LS March 3, 2021
I was able to build my Panther in my basement and carried the finished pieces up one at a time through my living room and kitchen into a tiny 1 car garage where it now sits with its wings folded. The folding wings will allow me to share a hangar and transport it to any field for flight testing. I can't imagine building anything else in my limited space.
Chris Michaelis ColumbiaMD Panther LS March 3, 2021
Paul spent a lot of time with my friend and I on the Panther. Looks to be a great new product and I came away feeling confident they are building and supporting a very strong, safe, and well built plane.
Dick HoeyPanther May 1, 2016
After working with Rachael and Dan on getting my Corvair engine going for my Sonex, I have decided to build a Panther. Here's why: the support is outstanding! Phone calls are answered and texts are responded to almost immediately! After experiencing building three different aircraft from three different companies and presently converting the Sonex, I can say this from experience....these guys are first class!!
Phil Davis CorvairBuilder June 23, 2015
Previous
Next
Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 4,383 other subscribers
Rss Twitter Facebook-f
© 2021 SPA LLC
Designed by DreamHost