Prop for an O-320

Engine Topics
Forum rules
A forum for Panther aircraft builders and Enthusiasts. Two simple rules: Play nice and use a real name
Post Reply
75kr@att.net
Posts: 25
Joined: Sat Aug 05, 2017 3:30 pm
First Name: Kevin
Last Name: Ross
City or Town: Granbury
State or Province: TX
Location: Granbury, TX

Re: Prop for an O-320

Post by 75kr@att.net »

Fred,

I'm running an 0320 on a Tri-Gear long wing version Panther. I am using the three blade ground adjustable Sensenich prop. At 2,000 msl, warmer than standard day, WOT I can turn 2700 rpm and indicate 190 mph without wheel pants. With the current pitch I can climb at 120 mph IAS at 2100 fpm.
I've had to increase the pitch on the prop once as the freshly overhauled engine broke in and may have to do it again to prevent overspeeding the prop. Yes, I know I'm pressing the VNE, I can control that with throttle, especially after I get wheel pants fitted.

Kevin

fwellman@att.net
Posts: 65
Joined: Tue Feb 21, 2017 8:22 pm
First Name: Fred
Last Name: Wellman
City or Town: Middleburg Hts
State or Province: Ohio

Re: Prop for an O-320

Post by fwellman@att.net »

Hi all,

I have another prop/pitch/rpm/speed question for the group. Does anyone have an 0-320 in an LS airframe. If so what is your prop diameter and pitch, and what airspeed are you seeing at various rpm?

Thanks
Fred

ykachuro
Posts: 110
Joined: Wed Aug 30, 2017 8:17 pm
First Name: Yuri
Last Name: K
City or Town: St John + Steamboat
State or Province: USVI + CO

Re: Prop for an O-320

Post by ykachuro »

Rick, not sure if this is of much help as I am not flying yet, but I got a prop from Gary Hertzler. It is his Silver Bullet. He recommended going for 69x72 for my target altitude. With a O340 with high compression cylinders rated at 180hp at SL Mr. Hertzler’s estimate was that the static rpm at my field ellevation of 7-9k’ DA would be around 2400-2450 and WOT at 12.5k’ DA would be at the redline. Those would be very impressive numbers. Please let me know if you’d like Mr. Hertzler’s contacts. He has no website and is an old school craftsman. But he is reachable by email and was exceptionally responsive.

Dan recommended a Sensenich GA prop for it’s performannce and the ability to dial it in and have an option to taylor it to flying at various altituded, if needed. It would be a great choice but for the $$.

woolleys
Posts: 49
Joined: Sun May 19, 2013 8:27 am
First Name: Bob
Last Name: Woolley
City or Town: Green Cove Springs
State or Province: Florida

Re: Prop for an O-320

Post by woolleys »

Good morning Rick. I would recommend you talk to Dan at SPA. Sensenich has supplied several props for local Panther owners and he would have a detailed record of what might be the best prop for your use. Having flown Panthers with Cato's, Whirlwind, Airmaster constant speeds and Sensenich fixed pitched props, the best prop by far, in the fixed pitch arena, is the Sensenich ground adjustable two blade. Currently Ken Belisle is running a Sensenich two blade wood prop on his 160 HP Panther and it preforms well; it is a designed climb prop. The Sensenich ground adjustable is a bit pricey and will set you back about $4K for the necessary parts and pieces. I believe that the two blade wood ran about $2K. Considering your location and density altitude you might consider the Sensenich ground adjustable to give you the flexibility in tuning your engine for your flying location.

User avatar
MikeS.
Posts: 33
Joined: Wed Nov 27, 2013 11:21 am
First Name: Mike
Last Name: Smith
City or Town: Tuscaloosa
State or Province: AL
Location: TCL

Re: Prop for an O-320

Post by MikeS. »

Rick, that’s probably too much propeller for the Panther with an O-320. For comparison my Glasair TD had a Prince 68x83 with 180HP. Mike

User avatar
at7000ft
Posts: 175
Joined: Sun Apr 13, 2014 4:59 pm
First Name: RICK
Last Name: HOLLAND
City or Town: CASTLE ROCK
State or Province: Colorado
Location: Castle Rock, CO

Prop for an O-320

Post by at7000ft »

Does anyone have any recommendations for Sensenich fixed pitch wood props for an O-320 Panther? Found a guy selling a used 68x86.

Thanks

Rick H
Rick Holland
N6819Z

Post Reply