Prime and Paint

[monclerjacket]

Yeezy Slides
Yeezy Official Website
Jordan 1
Jordan 12
Jordan 11
Yeezy Slides
NFL Shop
NFL Store
Yeezy Supply
Jordan 4
Yeezy Website
Yeezy Slides
Jordan 12
Jordan 11
Jordan 1
Air Jodan
NFL Jerseys
Yeezy Slides
Yeezy Website
Yeezy Supply
Yeezy Store
Yeezy Slides
Yeezy Store
Louis Vuitton
Louis Vuitton Outlet
Louis Vuitton
Louis Vuitton Outlet
Louis Vuitton
Louis Vuitton Outlet
Louis Vuitton
Louis Vuitton Outlet
Yeezy Shoes
Yeezy Supply
Yeezy Slides
Yeezy Supply
Yeezy 350
Yeezy Shoes
Yeezy Slides
Adidas Yeezy
Yeezy Adidas
Adidas Yeezy
Yeezy Official Website
Adidas Yeezy
Yeezy Supply
Yeezy Slides
Yeezy Slides
Yeezy Official
Yeezy 350
Yeezy 2024



Tags:Yeezy Shoes,Yeezy Slides,Jordan 1,Air Jordan,Jordan

[Greg Pixley]

It's an Acrylic Urethane applied over DP50LF Epoxy primer. And your right about Niceville, never thought I'd end up here but it was a great place to raise kids and retire.

[Lowrider]

Greg,

Is that PPG an epoxy paint or primer? I used to live in Niceville when I was a charter member of the 1st SOW...good place to be!!

[Greg Pixley]

I just finished painting the floor and side panels with Shopline (PPG) and can't tell the difference from powder coat. The color was #34615 #4 Medium Gray. All my painting experience is with PPG so I stayed with what I know and have reducers for. A quart was $60 with hardener but I only used a quarter of that.

Greg Pixley

[Steamer]

Glen,

I've had that happen with rattle cans. In my experience it was because the paint had set on the shelf too long.

Stan J.

[GlenNJ]

Mike,
I'll order a couple of cans and give them a try. I'm working on the spars, and I'd like to put a thin mist coat on the pieces. I can't do that with the Moeller chromate, the way it spits and splatters out of the can. All 4 cans I've used did the same thing, from beginning to end of the can.
Glen

[MikeS.]

Zinc Chromate Primer in rattle can:

http://www.aircraftspruce.com/catalog/c ... ckkey=7822

Part #: 09-00901 is yellow. Part #: 09-00895 is green. $12.75

When finished spraying hold the can upside down and clear out the tube, and wipe off the spray nozzle. Store the cans upside down at room temperature. I've been working out of the same can for over a year with no issues.

[GlenNJ]

Does anyone know of a good zinc chromate paint that sprays well from a rattle can. I used Moeller zinc chromate green on my tail section. I like the paint, but the spray pattern from the can isn't good. Instead of a fine mist, it tends to splatter a lot. I tried shacking the can for an extra long time and warming it up, but I still can't get it to flow evenly out of the can.

Glen

[danweseman]

The touch up paint should be fine for the inside areas of fuse. I would use a etching primer like the duplicolor self etching from advance auto. The touch up paint is expensive. We like to use duplicolor "new ford grey" for all interior aluminum. it is a touch darker than the PC , but we like the slightly contrasting look. For a really clean look , paint all skins before riveting onto fuse "cage".
Dan

[rlweseman]

Hi Guys - Just got the paint added to the site. See here:
Powder Coat Touchup Paint