Panther 92
Posted: Mon Sep 11, 2017 6:52 pm
My tail kit is arriving today. While waiting, I built a large, portable, adjustable work table.
Posting the link to the future photo log:
https://www.icloud.com/sharedalbum/#B0x5oqs3qKz8eJ
My main objective is to finish the build. Hence, i will strictly stick to the plans, will make the process as simple and straihtforward for myself as possible while focusing on structural strength, lightness and performance. Cosmetics are in the eyes of the beholder.
For now my working thoughts are:
- short wing
- IO320 or 340
- CCP rivets all around
- as many pre-built components as available (wing spars, tanks and canopy?)
- no priming
- no paint (other than fiberglass)
Posting the link to the future photo log:
https://www.icloud.com/sharedalbum/#B0x5oqs3qKz8eJ
My main objective is to finish the build. Hence, i will strictly stick to the plans, will make the process as simple and straihtforward for myself as possible while focusing on structural strength, lightness and performance. Cosmetics are in the eyes of the beholder.
For now my working thoughts are:
- short wing
- IO320 or 340
- CCP rivets all around
- as many pre-built components as available (wing spars, tanks and canopy?)
- no priming
- no paint (other than fiberglass)