Cogsdill Burraway

General Panther Building Discussion
Forum rules
A forum for Panther aircraft builders and Enthusiasts. Two simple rules: Play nice and use a real name
Post Reply
Matsu727737
Posts: 8
Joined: Sun Dec 29, 2019 7:32 pm
First Name: Frederic
Last Name: Hellwig
City or Town: Nevada City
State or Province: CA

Re: Cogsdill Burraway

Post by Matsu727737 »

Thanks for the reply Paul!
Top
psalter
Posts: 146
Joined: Sun May 19, 2013 6:50 pm
First Name: Paul
Last Name: Salter
State or Province:
Location: Green Cove Springs, Florida

Re: Cogsdill Burraway

Post by psalter »

I have had several 3/32" ones. I typically only used it for hard to get to areas. It works fairly well on the backside of a part, not so well on the top surface. They are somewhat fragile and will twist apart easily if you accidentally hit something below the hole you are deburring. For the fuselage, they are invaluable, where it is in square tubing that has no way to deburr inside except something like this.
Paul Salter
Team Panther
Engineer and Builder
Top
Matsu727737
Posts: 8
Joined: Sun Dec 29, 2019 7:32 pm
First Name: Frederic
Last Name: Hellwig
City or Town: Nevada City
State or Province: CA

Cogsdill Burraway

Post by Matsu727737 »

I just ordered my tail kit and am in the process of ordering tools. Has anybody used the burraway tool, and if so, what size should I order?
Top
Post Reply

Return to “Building a Panther”