Page 1 of 1
Re: Fiberglass
Posted: Wed Jun 24, 2015 9:08 am
by Viking
Thank you guys!
Re: Fiberglass
Posted: Tue Jun 23, 2015 6:15 am
by Tony Spicer
Ragnar,
Have a look here:
https://picasaweb.google.com/tonyboytoo/TailFeathers For installing tips, start with photo #126. Note disclaimer. SuperFil available from ACS. For a good sanding block, stop by your local auto paint store and see what they have in the sticky back sandpaper department. Mine has strips about 3" x 16". Cut a board for backing.
Tony
Re: Fiberglass
Posted: Tue Jun 23, 2015 5:52 am
by mayo3808
I like to use West System epoxy with micro ballons or cotton flock, depending on what am filling. When i trimmed the tips for Horz I filled with epoxy mixed with flock, let dry sand shape as needed.
Fiberglass
Posted: Mon Jun 22, 2015 8:27 pm
by Viking
What products do you guys and gals recommend for fiberglass work, I´m installing the tips for the HT/VT. I need to trim the tips like most you of you probably have.