Page 1 of 1
Re: Installing HT and VT tips
Posted: Sun Mar 06, 2016 5:33 pm
by Tony Spicer
Re: Installing HT and VT tips
Posted: Sun Mar 06, 2016 4:33 pm
by psalter
We riveted the tips on the prototype. Hinge pins can be removed from the bottom on the v-stab. And from the center on the elevator with the tips on.
Installing HT and VT tips
Posted: Sun Mar 06, 2016 4:14 pm
by PlaneDan
I believe that it is common practice to rivet these to the VT and HT. When that is done, how are the elevator and rudder removed and re-attached? Or, is it expected that this will never be done without having to drill out the rivets? I am installing them now and don't want to use anchor nuts, but if necessary will do so.
I'll bet Tony has the answer to this on his Picasa, but I am too lazy to look for it.