Page 1 of 1
Re: Tail Wheel linkage and call out
Posted: Wed May 04, 2016 3:23 pm
by danweseman
Bill (and Others)
The tail wheel link will be covered in final assembly part 2 ,which Paul is working on now. Should be posted next week. Final assembly part 1 should be posted in the next 48 hrs.
Dan
Re: Tail Wheel linkage and call out
Posted: Wed May 04, 2016 3:12 pm
by Tony Spicer
Re: Tail Wheel linkage and call out
Posted: Wed May 04, 2016 1:06 pm
by mayo3808
SPA has the tail wheel linkage kit available with all the parts. I think I did have to purchase my rod end bearings.
Re: Tail Wheel linkage and call out
Posted: Wed May 04, 2016 12:41 pm
by av8shar
Here is what I have for the parts, no instructions though so I haven't tried to assembled it... will need to go ahead and give it a go soon though.
7/16 Od x 3.5L x .072 wire 2 mcmaster 1986K113
Rod ends 1/4-28 shank 3/16 ball ID 2 mcmaster 60645K91
AN316-4 2
AN970-3 2
AN3-12 1
AN3-11 1
AN365-428A 2
.192 ID x 5/16 OD x .125 L aluminum spacer 2 mcmaster92510A560
.192 ID x 5/16 OD x .250 L aluminum spacer 2 mcmaster92510A562
MS27039C-0812 1
AN364C-832 1
Tail Wheel linkage and call out
Posted: Wed May 04, 2016 11:17 am
by ynkster
Does anyone have a parts list and assembly instructions for Tail wheel linkage?