AN42-AN49 Eye bolts
These bolts have a tolerance of 0.003” and are fine thread.
The materials can be: Steel (-) or Stainless (C)
Options: ‘-‘ in part number is cad plated steel
‘C’ in part number is Stainless Steel
‘A’ in part number is undrilled shank
AN42 and AN43 was replaced by AN42B and AN43B respectively
Length of bolt can be determined by the following for AN42 and AN43:
If single digit the overall length of the bolt in 1/8” increments + 1/32”,
(Example: AN42B-4A is 4/8” + 1/32” or .531” long and 3/16” diameter)
If a double digit, first digit is the number of inches, second digit is number of 1/8” increments + 1/32”
(Example: AN42B-14A is 1” + 4/8”+ 1/32” or 1.531” long and 3/16” diameter undrilled)
Common sizes, grips and lengths
|
AN42B |
AN43B |
AN44 |
AN45 |
||||
|
10-32 UNF-3A |
¼-28 UNF-3A |
5/16-24 UNF-3A |
5/16-24 UNF-3A |
||||
Eye hole |
.190-.192 |
.190-.192 |
.250-.253 |
.313-.316 |
||||
DASH NO |
GRIP +-.016 |
LENGTH +.031 -.016 |
GRIP +-.016 |
LENGTH +.031 -.016 |
GRIP +-.016 |
LENGTH +.031 -.016 |
GRIP +-.016 |
LENGTH +.031 -.016 |
3 |
.063 |
.469 |
- |
- |
- |
- |
- |
- |
4 |
.125 |
.531 |
.063 |
.531 |
.063 |
.594 |
- |
- |
5 |
.250 |
.656 |
.188 |
.656 |
.188 |
.719 |
.063 |
.703 |
6 |
.375 |
.781 |
.313 |
.781 |
.313 |
.844 |
.188 |
.828 |
7 |
.500 |
.906 |
.438 |
.906 |
.438 |
.969 |
.313 |
.953 |
10 |
.625 |
1.031 |
.563 |
1.031 |
.563 |
1.064 |
.438 |
1.078 |
11 |
.750 |
1.156 |
.688 |
1.156 |
.688 |
1.219 |
.563 |
1.203 |
12 |
.875 |
1.281 |
.813 |
1.281 |
.813 |
1.344 |
.688 |
1.328 |
13 |
1.000 |
1.406 |
.938 |
1.406 |
.938 |
1.469 |
.813 |
1.453 |
14 |
1.125 |
1.531 |
1.063 |
1.531 |
1.063 |
1.594 |
.938 |
1.578 |
15 |
1.250 |
1.656 |
1.188 |
1.656 |
1.188 |
1.719 |
1.063 |
1.703 |
16 |
1.375 |
1.781 |
1.313 |
1.781 |
1.313 |
1.844 |
1.188 |
1.828 |
17 |
1.500 |
1.906 |
1.438 |
1.906 |
1.438 |
1.969 |
1.313 |
1.953 |
20 |
1.625 |
2.031 |
1.563 |
2.031 |
1.563 |
2.094 |
1.438 |
2.078 |
Current spec: NASM42 thru NASM49
AN742, AS5587 Loop Clamp (no cushion)
Material Codes:
Band: ‘-‘ – Steel clamp (AN742 spec)
‘C’ - Type 321 stainless steel (AS5578 spec)
‘D’ - 2024-T42 Aluminum (Most Common)
‘F’ – Type 321 stainless (AN742 spec)
Sizes: Available in 1/16” increments measured inside diameter. Available in 1/8” (-2) to 4.125” (-66).
Current spec: AS5578
|
|
Band Thickness |
|
Size Code |
Inside diameter |
Aluminum |
Stainless |
2 |
.125 (1/8) |
.032 |
.020 |
3 |
.188 (3/16) |
.032 |
.020 |
4 |
.250 (1/4) |
.032 |
.020 |
5 |
.313 (5/16) |
.032 |
.020 |
6 |
.375 (3/8) |
.032 |
.020 |
7 |
.438 (7/16) |
.032 |
.020 |
8 |
.500 (1/2) |
.032 |
.020 |
9 |
.563 (9/16) |
.032 |
.020 |
10 |
.625 (5/8) |
.032 |
.020 |
11 |
.688 (11/16) |
.050 |
.032 |
12 |
.725 (3/4) |
.050 |
.032 |
13 |
.813 (13/16) |
.050 |
.032 |
14 |
.875 (7/8) |
.050 |
.032 |
15 |
.938 (15/16) |
.050 |
.032 |
16 |
1.00 (1) |
.050 |
.032 |
17 |
1.063 (1 1/16) |
.050 |
.032 |
18 |
1.125 (1 1/8) |
.050 |
.032 |
19 |
1.188 (1 3/16) |
.050 |
.032 |
20 |
1.250 (1 1/4) |
.063 |
.032 |
21 |
1.313 (1 5/16) |
.063 |
.032 |
22 |
1.375 (1 3/8) |
.063 |
.032 |
23 |
1.438 (1 7/16) |
.063 |
.032 |
24 |
1.500 (1 1/2) |
.063 |
.032 |
Examples: AN742D16 1” aluminum clamp, Same as AS5578D16
AN742F16 1” stainless steel clamp, Same as AS5578C16
MS21919, AS21919 Cushioned Loop Clamp
Material Codes:
Band: ‘C’ - Type 321 stainless steel
‘D’ - 2024-T42 Aluminum (Most Common)
Cushion: ‘E’ – Ethylene Propylene
‘F’ – Nitrile
‘G’ – Chloroprene (Most Common)
‘H’ – Silicone
‘J’ – Fluorosilicone
Sizes: Available in 1/16” increments measured inside cushion. Available in 1/16” to 4.125”.
Current spec: AS21919
|
|
Band Thickness |
|
Size Code |
Inside diameter |
Aluminum |
Stainless |
1 |
.062 (1/16) |
.020 |
.020 |
2 |
.125 (1/8) |
.032 |
.032 |
3 |
.188 (3/16) |
.032 |
.032 |
4 |
.250 (1/4) |
.032 |
.032 |
5 |
.313 (5/16) |
.032 |
.032 |
6 |
.375 (3/8) |
.032 |
.032 |
7 |
.438 (7/16) |
.032 |
.032 |
8 |
.500 (1/2) |
.032 |
.032 |
9 |
.563 (9/16) |
.050 |
.032 |
10 |
.625 (5/8) |
.050 |
.032 |
11 |
.688 (11/16) |
.050 |
.032 |
12 |
.725 (3/4) |
.050 |
.032 |
13 |
.813 (13/16) |
.050 |
.032 |
14 |
.875 (7/8) |
.050 |
.032 |
15 |
.938 (15/16) |
.050 |
.032 |
16 |
1.00 (1) |
.050 |
.032 |
MS21266 Plastic Edging Grommet
Material: ‘N’ after Dash number for Nylon (most common)
‘T’ after Dash number for TFE (Polytetrafluoroethylene)
‘F’ after Dash number for FEP (Polyfluoroethylenepropylene)
Sizes: Available in widths .016” to .510” wide and in 12.75” lengths
Current Spec: NASM21266 (Still uses MS21266 for Part Number)
Common sizes
Dash No. |
For Sheet Thickness |
Overall Width |
Overall Height |
-1 |
.015-.052 |
.150 |
.155 |
-2 |
.052-.085 |
.175 |
.155 |
-3 |
.085-.128 |
.220 |
.155 |
-4 |
.128-.192 |
.325 |
.230 |
-5 |
.192-.255 |
.385 |
.240 |
-6 |
.255-.318 |
.445 |
.255 |
-7 |
.318-.380 |
.515 |
.255 |
-8 |
.380-.510 |
.640 |
.255 |
Example: MS21266-1N Nylon edging to fit thickness between .015” and .052”
