https://picasaweb.google.com/tonyboytoo ... 4042023186
https://picasaweb.google.com/tonyboytoo ... 3191620978
https://picasaweb.google.com/tonyboytoo ... 9231861698
https://picasaweb.google.com/tonyboytoo ... 0330664018
Tony
Installing HT and VT tips
Forum rules
A forum for Panther aircraft builders and Enthusiasts. Two simple rules: Play nice and use a real name
A forum for Panther aircraft builders and Enthusiasts. Two simple rules: Play nice and use a real name
-
Tony Spicer
- Posts: 304
- Joined: Sun May 05, 2013 7:35 am
- First Name: Tony
- Last Name: Spicer
- State or Province:
- Location: Wilmington, NC 7NC1
-
psalter
- Posts: 146
- Joined: Sun May 19, 2013 6:50 pm
- First Name: Paul
- Last Name: Salter
- State or Province:
- Location: Green Cove Springs, Florida
Re: Installing HT and VT tips
We riveted the tips on the prototype. Hinge pins can be removed from the bottom on the v-stab. And from the center on the elevator with the tips on.
Paul Salter
Team Panther
Engineer and Builder
Team Panther
Engineer and Builder
-
PlaneDan
- Posts: 241
- Joined: Sun Nov 17, 2013 11:52 am
- First Name: Daniel
- Last Name: Heath
- City or Town: Lexington
- State or Province: SC USA
- Location: Lexington, SC USA
- Contact:
Installing HT and VT tips
I believe that it is common practice to rivet these to the VT and HT. When that is done, how are the elevator and rudder removed and re-attached? Or, is it expected that this will never be done without having to drill out the rivets? I am installing them now and don't want to use anchor nuts, but if necessary will do so.
I'll bet Tony has the answer to this on his Picasa, but I am too lazy to look for it.
I'll bet Tony has the answer to this on his Picasa, but I am too lazy to look for it.
PantherBuilder.org