Need Advise
Forum rules
A forum for Panther aircraft builders and Enthusiasts. Two simple rules: Play nice and use a real name
A forum for Panther aircraft builders and Enthusiasts. Two simple rules: Play nice and use a real name
-
F16dcc431
- Posts: 22
- Joined: Fri Nov 17, 2017 9:20 pm
- First Name: Joshua
- Last Name: Wilson
- City or Town: Port saint lucie
- State or Province: Fl
-
Jinkers
- Posts: 45
- Joined: Wed Aug 05, 2015 12:08 pm
- First Name: Scott
- Last Name: Flugum
- City or Town: Fort Collins
- State or Province: CO
- Location: Fort Collins, CO
- Contact:
Re: Need Advise
Unless he dimpled everything before he used the flush rivets.
__________________________
-Scott
Panther S/N 065
-Scott
Panther S/N 065
-
colin
- Posts: 16
- Joined: Sat May 09, 2015 2:57 pm
- First Name: colin
- Last Name: dyke
- City or Town: New Dublin
- State or Province: Ontario
Re: Need Advise
Unfortunately you need to drill those out . That will not pass an inspection and its not how the rivet was designed to work.
-
F16dcc431
- Posts: 22
- Joined: Fri Nov 17, 2017 9:20 pm
- First Name: Joshua
- Last Name: Wilson
- City or Town: Port saint lucie
- State or Province: Fl
Need Advise
I Have had a friend helping me skin the tail and after he had shot all the rivets I noticed he shot countersink rivets. I am building the Panther with protruding heads. I'm on the fence on whether to go back and redo everything that he shot. Is this a simple eye sore or is it a structural liability. Any help would be Appreciated.
Joshua Wilson #094