The ideal worked great.
I did make me a set from an old set of nail dimple dies I had by JB welding them to a set of vise grip needle noses plies.
Map Pocket Dimpler
Forum rules
A forum for Panther aircraft builders and Enthusiasts. Two simple rules: Play nice and use a real name
A forum for Panther aircraft builders and Enthusiasts. Two simple rules: Play nice and use a real name
-
mayo3808
- Posts: 39
- Joined: Fri Mar 13, 2015 7:30 am
- First Name: Brent
- Last Name: Mayo
- City or Town: Fernandina
- State or Province: FL
Re: Map Pocket Dimpler
Dan,
The ideal worked great.
I did make me a set from an old set of nail dimple dies I had by JB welding them to a set of vise grip needle noses plies.
The ideal worked great.
I did make me a set from an old set of nail dimple dies I had by JB welding them to a set of vise grip needle noses plies.
Brent Mayo
SN#053 Flying
Corvair 3.0
Fernandina, FL
SN#053 Flying
Corvair 3.0
Fernandina, FL
-
danweseman
- Posts: 133
- Joined: Sun May 19, 2013 9:18 pm
- First Name: dan
- Last Name: weseman
- State or Province:
Re: Map Pocket Dimpler
Brent
We use a "pop rivet dimpler set " with a very short nail,just long enough to alighn both dies . We squeeze it with Channel Lock" pliers
Dan W
We use a "pop rivet dimpler set " with a very short nail,just long enough to alighn both dies . We squeeze it with Channel Lock" pliers
Dan W
Dan Weseman
Designer
Builder
Test pilot
Panther 515XP
Designer
Builder
Test pilot
Panther 515XP
-
PlaneDan
- Posts: 241
- Joined: Sun Nov 17, 2013 11:52 am
- First Name: Daniel
- Last Name: Heath
- City or Town: Lexington
- State or Province: SC USA
- Location: Lexington, SC USA
- Contact:
Re: Map Pocket Dimpler
I just forced my squeezer in there. It bent the pocket out a little, but it formed back OK when I re-installed it. I did not like it, but like you, did not know how to do it any other way.
PantherBuilder.org
-
swpedano
- Posts: 13
- Joined: Wed Aug 14, 2013 9:08 pm
- First Name: Stephen
- Last Name: Pedano
- State or Province:
- Location: Jacksonville Florida
Re: Map Pocket Dimpler
I used the dimple dies out of my c frame and just used a pair of slip joint pliers to squeeze them together it takes a little time but it worked for me
-
mayo3808
- Posts: 39
- Joined: Fri Mar 13, 2015 7:30 am
- First Name: Brent
- Last Name: Mayo
- City or Town: Fernandina
- State or Province: FL
Map Pocket Dimpler
What method can I use to dimple the smaller (thinner) map pocket? Unable to get the nail dimple die in there to dimple.
I know Avery make a vise grip dimpler, may have to purchase one. Any ideals?
I know Avery make a vise grip dimpler, may have to purchase one. Any ideals?
Brent Mayo
SN#053 Flying
Corvair 3.0
Fernandina, FL
SN#053 Flying
Corvair 3.0
Fernandina, FL