Page 1 of 1
Re: Map Pocket Dimpler
Posted: Fri Oct 16, 2015 12:14 pm
by mayo3808
Dan,
The ideal worked great.
I did make me a set from an old set of nail dimple dies I had by JB welding them to a set of vise grip needle noses plies.
Re: Map Pocket Dimpler
Posted: Thu Oct 15, 2015 3:19 pm
by danweseman
Brent
We use a "pop rivet dimpler set " with a very short nail,just long enough to alighn both dies . We squeeze it with Channel Lock" pliers
Dan W
Re: Map Pocket Dimpler
Posted: Thu Oct 15, 2015 2:13 pm
by PlaneDan
I just forced my squeezer in there. It bent the pocket out a little, but it formed back OK when I re-installed it. I did not like it, but like you, did not know how to do it any other way.
Re: Map Pocket Dimpler
Posted: Thu Oct 15, 2015 1:15 pm
by swpedano
I used the dimple dies out of my c frame and just used a pair of slip joint pliers to squeeze them together it takes a little time but it worked for me
Map Pocket Dimpler
Posted: Thu Oct 15, 2015 9:02 am
by mayo3808
What method can I use to dimple the smaller (thinner) map pocket? Unable to get the nail dimple die in there to dimple.
I know Avery make a vise grip dimpler, may have to purchase one. Any ideals?
