•We recommend leaving the side skins off the forward fuselage (steel cage), firewall, and belly skin of tail cone off until all internal work on fuselage has been completed.
•It is recommended to leave the engine off until everything inside the fuselage is complete. If you have to hang the engine, keep the skins clecoed in place. Do not transport aircraft with engine in place and no side skins.
1.Install Pitot tube disconnect (optional)
2.Install wing root fairings and walkway doubler
3.Install wing tips
4.Install brake lines
5.Install throttle and mixture linkages
6.Install baggage compartment items
7.Fit optional step
8.Install firewall and side skins
9.Install cheek cowling attachment strips
10. Install exhaust tunnel formers
11. Tail cone belly skin
12. Map pockets
13. Throttle cable bracket
14. Wing Pin Safety Clips
15. Seat belt and seat installation
16. Install vertical stabilizer tip
17. Install horizontal stabilizer tip
18. Install engine mount
19. Install center fuel line tunnel
20. Assemble tail wheel link
