1. If not already done, run 80 grit sand paper along the inside surfaces of the canopy bubble. You must do this so that tape can stick to the surface.
2.Run the 2” tape along all inside surfaces of the canopy skirt within 1/4” to 1/8” of the inside edge – creating a barrier for the adhesive.
3. Now, using your tape, go along the outside of the canopy skirt and tape off right up to the edge of the canopy skirt where it meets the bubble.
4.Blow off all surfaces first with a light air dusting from your air hose and then thoroughly wipe all adhesive areas.
